MULTI 3500i HANDHELD MULTIPARAMETER METERS
FEATURES:
- Accurate, rugged and easy to use
- Displays three parameters at once
- Works with the new MPP 350 multi-parameter probe
Listing Details
With its ability to measure pH, mV, oxygen, conductivity and ISE, the Multi 3500i, Handheld Multiparameter Meters are the perfect
choice for all of your water, wastewater and environmental field measurement needs. Like all WTW field instruments, the Multi
3500i, handheld multiparameter meter is designed to stand up to the rigors of daily plant and field conditions while being accurate
and easy to use. The handheld multiparameter meter's bright backlit screen can display pH, oxygen, conductivity and temperature
simultaneously.
Easy to use, the Multi 3500i, Handheld Multiparameter Meters feature a high resolution, high precision, simple, menu-driven user
interface. The handheld multiparameter meter has a datalogger, memory for 1,800 data sets and a real-time clock that support
good laboratory practice (GLP) requirements. The Multi 3500i, handheld multiparemeter meters won't let you down with their
built-in NiMH rechargeable battery for up to 500 hours of continuous measurements (AC adaptor included). Combined with the MPP
350 multiparameter probe the handheld multiparameter meter is ideal for environmental field measurements. But the Multi 3500i,
handheld multiparameter meters are also at home in your lab when used with the ConOx conductivity/oxygen sensor. In addition,
all the currently compatible WTW pH, combination ion specific, oxygen and conductivity sensors can be used to extend the usefulness
of the handheld multiparameter meter.
MPP 350 Multiparameter Meter Probe Wherever simultaneous measurement of dissolved oxygen, conductivity, and pH or ORP is required the MPP 350 is the probe or choice for the Multi 3500i, handheld multiparameter meters. With a diameter of only 1.6 in (41.5 mm) and a length of 11.42 in (29 cm), this multiparameter meter probe is usable in a wide range of applications. The Multiparameter Meter Probe is suitable for measurements in lakes, rivers, seawater and brackish water, and in monitoring or groundwater wells to a maximum depth of 330 ft. (100 m). The special pH sensor SensoLyt® MPP-A, not included with MPP 350 multiparameter meter probe, provides reproducible measurement values in water, even at low conductivity levels. The special ORP sensor SensoLyt® MPP-A Pt, not included with MPP 350 multiparameter meter probe, allows you to measure the ORP voltage of your sample. For cable lengths greater than 20 ft. (6 m) a battery operated stirrer is included. The conductivity measuring cell with WTW's proven 4-pole-measurement technology has a measuring range of 1 uS/cm to 2 S/cm. The MPP 350 is available with several different cable lengths up to 330 ft (100 m). Accessories include specialized calibration vessels. Two field kits are available which include: a case, Multi 3500i handheld multiparameter meter, accessories and an MPP 350 multiparameter meter probe with either a 20 ft. (6 m) or 81 ft. (25 m) cable length. ConOx: Conductivity and Oxygen Measurement with fully automatic Salinity Correction The ConOx handheld multiparameter meter probes are great for all water analysis applications in the field and in the lab. The Multi 3500i handheld multiparameter meters use this slender and handy handheld multiparameter meter probe to measure three parameters: conductivity, dissolved oxygen and temperature. The multiparameter meter probe's oxygen module can be easily removed and works according to the time-proven galvanic principle. Low-maintenance and ready for use any time you need it, the handheld multiparameter meter probe's oxygen module also includes the OxiCal® CX calibration vessel. The handheld multiparameter meter probe's conductivity sensor features the time-proven 4-electrode system and may be used without the oxygen module. Easy to clean, the handheld multiparameter meter probe's conductivity sensor is capable of accurate measurements even when used in environments that would foul conventional electrodes. The handheld multiparameter meter probes are available with cable lengths 4.9 ft, 9.8 ft, 19.7 ft, 32.8 ft, 49.2 ft, 65.6 ft (1.5 m, 3 m, 6 m, 10 m, 15 m, 20 m). |
pH measurement | Oxygen measurement | Conductivity measurement | ISE measurement | |
Range/Resolution |
pH: -2.000 to 20.000 / 0.001 -2.00 to 20.00 / 0.01 mV: -999.9 to +999.9 / 0.1 -2000 to +2000 / 1 Temp.: 23 to 221 °F (-5.0 to 105.0 °C) / 0.1 (0.1) |
O2 Concentration: 0.00 to 20.00 mg/l / 0.01 0.0 to 90.0 mg/l / 0.1 O2 Saturation: 0.00 to 200.0% / 0.1 0.0 to 600% / 1 O2 Partial Pressure: 0.0 to 200.0 mbar / 0.1 0.0 to 1250 mbar / 1 Temp: 32 to 122 °F (0.0 to 50.0 °C) / 0.1 (0.1) |
Conductivity: 0.0 to 2000 mS/cm in five ranges / 0.01 to 1 in three ranges 0.00 to 20.00 uS/cm (K=0.1 cm-1) 0.000 to 2.000 uS/cm (K=0.01 cm-1) Salinity: 0.0 to 70.0 according to the IOT table / 0.1 TDS: 0 to 2000 mg/l factor can be set between 0.40 and 1.00 / 1 Temp: 23 to 221 °F (-5.0 to 105.0 °C) / 0.1 (0.1) |
ISE: 0.000 to 2000 mg/l in 4 ranges / 0.001 to 1 in 4 ranges |
Accuracy (+ 1 Digit) |
pH: + 0.004 over the temperature range from +59 to +95°F (+15 to +35°C)* mV: (-999.9 to +999.9) + 0.2 over the temperature range from +59 to +95°F (+15 to +35°C) (-2000 to +2000) + 1 over the temperature range from +59 to +95°F (+15 to +35°C) Temp: (NTC 30 kΩ)+ 0.2 over the temperature range from 32 to +131°F (0 to +55°C) (PT 1000) + 0.3 over the temperature range from 32 to +131°F (0 to +55°C) * when measuring in a range of + 2 pH around a calibration point. |
O2 Concentration: + 0.5 % of measured value at ambient temperature +41 to +86 °F (+5 to +30 °C) O2 Saturation: + 0.5 % of measured value when measuring in the range of + 10 K around the calibration temperature O2 Partial Pressure: + 0.5 % of measured value at ambient temperature +41 to +86 °F (+5 to +30 °C) |
Conductivity: + 0.5 % of value Salinity: + 0.1 from +41 to +77 °F (+5 to +25 °C) + 0.1 from +77 to +86 °F (+25 to +30 °C) TDS: + 1 mg/l Temp: + (NTC 30 kΩ)+ 0.2 over the temperature range from 32 to +131°F (0 to +55°C) (PT 1000) + 0.3 over the temperature range from 32 to +131°F (0 to +55°C) |
N/A |
Temperature Compensation |
Automatic: 23 to 221 °F (-5 to +105 °C) Manual: -4 to 266 °F (-20 to +130 °C) |
32 to 122°F (0 to +40 °C) Reviews (0)
|