SP100 WATER SAMPLER
The portable water sampler is ideal for removing samples from shallow wells and surface water sources, including lakes, ponds, and
holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal
maintenance. The water samplers are designed to take a manual sample and they have the ability to backflush the sample hose
once a sample has been taken.
Power The SP100 water sampler includes an internal 5AH 12V DC rechargable gel cell battery that will power the water sampler to pump approximately 19 liters (5 gallons) between rechargings. A battery charger is included with the unit and will recharge the battery within 12 hours. Sampling To provide high sample integrity, the water sample never comes in contact with any water sampler components other than the norprene and polyethylene tubing. The tubing is easy to clean and replaced. To avoid cross-contamination or lengthy decontamination procedures, simply change the inexpensive tubing between samples. |
Operating Temperature: 32° to +158°F (0° to +70°C) Battery: Rechargeable 12 VDC, 5 AH Gel Cell Battery Life: Appoximately 1 hour of continuous sampling Sample Pump: Flow Rate: 1000 ml per minute at 4 ft. head Type: Peristaltic Maximum Lift: 22 ft (6.7 m) Pump Tube: Norprene 1/4 inch ID Sample Hose: 15 ft (4.6 m) nylon reinforced polyethylene tubing with intake strainer. Enclosure: Expanded UV protected PVC Dimensions: 9x7.5x4.5 inch (23x19x11 cm) Weight: 6 lb (2.7 kg) (Shipping Weight 7 lb (3.2 kg)) |
SP100B.pdf (527 views)
FEATURES:
- Easy push-button control for exact sample size
- One liter per minute rate at 4-foot head
- Internal rechargeable battery
- Pump approximately 150 liters (40 gallons) between rechargings
- Weather resistant enclosure
- 15' pickup hose with strainer