SP100 WATER SAMPLER

83.jpg
FEATURES:
  • Easy push-button control for exact sample size
  • One liter per minute rate at 4-foot head
  • Internal rechargeable battery
  • Pump approximately 150 liters (40 gallons) between rechargings
  • Weather resistant enclosure
  • 15' pickup hose with strainer
Rating
0 vote
Favoured:
0

Listing Details

Product Description
The portable water sampler is ideal for removing samples from shallow wells and surface water sources, including lakes, ponds, and holding pools.  The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance.  The water samplers are designed to take a manual sample and they have the ability to backflush the sample hose once a sample has been taken. Power
The SP100 water sampler includes an internal 5AH 12V DC rechargable gel cell battery that will power the water sampler to pump approximately 19 liters (5 gallons) between rechargings.  A battery charger is included with the unit and will recharge the battery within 12 hours. Sampling
To provide high sample integrity, the water sample never comes in contact with any water sampler components other than the norprene and polyethylene tubing.  The tubing is easy to clean and replaced.  To avoid cross-contamination or lengthy decontamination procedures, simply change the inexpensive tubing between samples.
Specification
Operating Temperature: 32° to +158°F (0° to +70°C)
Battery: Rechargeable 12 VDC, 5 AH Gel Cell
Battery Life: Appoximately 1 hour of continuous sampling Sample Pump:
     Flow Rate: 1000 ml per minute at 4 ft. head
     Type: Peristaltic
     Maximum Lift: 22 ft (6.7 m)
Pump Tube:  Norprene 1/4 inch ID
Sample Hose:  15 ft (4.6 m) nylon reinforced polyethylene tubing with intake strainer. Enclosure: Expanded UV protected PVC
Dimensions: 9x7.5x4.5 inch (23x19x11 cm)
Weight: 6 lb (2.7 kg) (Shipping Weight 7 lb (3.2 kg))
File

SP100B.pdf (367 views)

Additional information