SPX INLINE LOW FLOW METERS

66.jpg
FEATURES:
  • Accurate at lower flow rates
  • Resistant to many low-corrosive chemical solutions
  • Pulse output is compatible with most PLC's & controllers
  • Transparent housing for sight flow inspection
  • Replaceable non-wetted solid-state pickup
Rating
0 vote
Favoured:
0

Listing Details

Product Description
The SPX Inline Low Flow Meters employ ruby bearings and nickel tungsten carbide shafts to allow the low flow meters to measure very low minimum flows and provide superior wear characteristics.  The SPX Inline Low Flow Meters' polypropylene body is resistant to many mild chemicals and are available in standard pipe thread sizes from 3/8" to 1" NPT.  A transparent acrylic cover provides visual flow indication for the PVDF rotor element of the chemical resistant low flow meters.  The 6-24 VDC pulse output of the SPX Inline Low Flow Meters is compatible with many different types of PLCs, counters, and a full range of rate displays and controls. Application Note: Straight pipe run of at least 5 diameters (10 diameters is preferred) upstream of the inline low flow meter is recommended.  Vertical and horizontal installations are all acceptable for the inline low flow meter. Are the SPX Inline Low Flow Meters compatible with (acid, caustic, ethylene glycol, etc.)?
The main material of the chemical resistant low flow meters is polypropylene, the standard lens is acrylic.  These are both good general chemically-resistant materials, but they can't handle many of the stronger chemicals.  The Inline Low Flow Meters' rotor is PVDF, the shaft is a nickel-bonded tungsten carbide, similar to a stainless steel in resistance.  If the wetted materials used on the Inline Low Flow Meters are questionable, please call for a consultation with our application specialists.
Specification
Accuracy: ±1% full scale
Flow Rates
     3/8": 0.07 - 5 GPM
     1/2": 0.1 - 10 GPM
     3/4": 0.2 - 20 GPM
     1":    0.5 - 40 GPM
Materials
     Body: Polypropylene
     Cover: Acrylic
     Rotor: PVDF
     Shaft: Nickel tungsten carbide
     Bearings: Ruby
Max. pressure: 150 psi (10 bar)
Max. temp: 160°F (70° C)
Power: 6-24 VDC, 2 mA minimum
Sensor cable: 18' AWG 22 3-conductor
Max. cable run: 2000 ft (650 m)
Weight: 2.5Lbs (1.13Kg)
Size: 4.1x2.2x2.1 inch (10.5 x 5.5 x 5 cm) (LxWxH)
File

SPXB.pdf (321 views)

File

spx.pdf (328 views)

File

ao55.pdf (339 views)

File

ft415.pdf (308 views)

File

ft420.pdf (333 views)

Additional information