TX100/200 ADJUSTABLE TURBINE FLOW METERS

64.jpg
FEATURES:
  • Two sizes fit entire pipe range: 3 to 12 inches and 12 to 40 inches
  • Turbine rotor to optimize minimum flow limits
  • High quality ruby bearings for long life
  • One easily-replaced moving part
  • Uses standard NPT threaded pipe fittings or saddles
  • Optional 4-20mA flow rate and totalizer display
  • Alternatively, signal can be sent directly to a PLC or other control
Rating
0 vote
Favoured:
0

Listing Details

Product Description
The TX100/200 series, adjustable insertion turbine flow meters, use ruby bearings and a non-drag pick-off to achieve a wide flow range and long life.  A sensor mounted in the body of the turbine flow meter detects the passage of miniature magnets in the rotor blades.  (Magnets are in 2 or 4 blades only.)  The resulting square-wave signal can be sent from the turbine flow meters for hundreds of feet without a transmitter, over unshielded cable.  This square wave signal can be sent directly to a PLC or other control, or can be converted using a blind 4-20mA output or flow rate and totalizer display. Designed for modularity and versatility, the TX100/200 series, adjustable insertion turbine flow meters, have a current-sinking pulse output, which can be combined with the appropriate transmitter or indicator depending on the application.  For rate and total display the FT415 or FT420 flow indicator can be mounted directly on the TX100/200 series adjustable insertion turbine flow meters or on a convenient wall.  For a 4-20mA analog output only, the AO55 blind 4-20mA converter can be mounted directly onto the turbine flow meter or onto a nearby wall.  If the TX100/200 series, adjustable insertion turbine flow meters, are being used with a programmable controller, the output signal can be fed direct with no other conditioning required. The installation fitting of the TX100/200 series adjustable turbine flow meter is standard 1-1/2 inch male NPT, and can be directly threaded into ordinary saddles or threaded weld fittings.  A depth adjustment system integrated into the design of the turbine flow meters allow two basic meter sizes to cover pipe sizes from 3 to 40 inches.
Specification
Accuracy: +1% of full scale
Flow Range: 0.2 - 30 ft/sec (.06 - 9.14 m/sec)
Sensor/Output: Hall Effect Sensor - 12 VDC current sinking pulse
Maximum Pipe Pressure: 200 psi (14 bar)
Maximum Temperature: 200° F (93° C)
Pipe Size:
     TX101: 3-12 inches (50-250mm)
     TX201: 12-40 inches (250-1200mm)
Fitting Size: 1-1/2 inch NPT
Insertion Force: 0.44 x pressure in pipe
Power: 5 - 24 VDC, 1.5 mA
Materials:
     Sensor Body: Brass, 316 SS
     Rotor: Polypro
     Shaft: Nickel-bound tungsten carbide
     Bearings: Ruby
     Cable: #22 AWG 3-con 18 ft (6m)
Maximum Cable Run: 2,000 ft (650m)
Dimensions:
     TX101: 4 inch square x 12 inch long (10cm square x 30.5cm long)
     TX201: 4 inch square x 17 inch long (10cm square x 43.2cm long)
     TX115: 15-3/4 in (40 cm) tall w/ 2 inch male NPT
     TX215: 21-3/4 in (55 cm) tall w/ 2 inch male NPT
Weight:
     TX101: 3 lbs (1.36 kg)
     TX201: 3.4 lbs (1.54 kg)
File

tx100.pdf (371 views)

File

tx100B.pdf (327 views)

Additional information