EX100/200 ELECTROMAGNETIC FLOW SENSORS

Product Description
The complete lack of moving parts of this insertion electromagnetic flow sensor is the source of its reliability.  There is no rotor to stop turning in dirty water and there are no bearings to wear out.  A rapidly reversing magnetic field is produced in the lower housing, and as the fluid moves through this field a voltage is generated.  This tiny voltage is measured and translated into a frequency signal which is proportional to flow rate.  This square wave signal can be sent directly to a PLC or other control, or can be converted using a blind 4-20mA output or flow rate and totalizer display. Designed for modularity and versatility, the EX100/200 series, insertion electromagnetic flow sensors, have a current-sinking pulse output, which can be combined with the appropriate transmitter or indicator depending on the application.  For 4-20mA analog output and display of rate and total, an FT420, pulse and 4-20mA output, can be used.  For a 4-20mA analog output only, the AO55, blind 4-20mA converter, can be mounted directly onto the meter.  If the EX100/200 series, electromagnetic flow sensors, are being used with a programmable controller, the output signal can be fed direct with no other conditioning required. The installation fitting of the EX100/200 series electromagnetic flow sensor is standard male NPT, and can be directly threaded into ordinary saddles or threaded weld fittings.
Specification
Accuracy: 1% of full scale
Output: Square wave pulse, opto isolated, 500 Hz @ 20 ft/sec
Bi-Directional: Direction output, opto isolated
Empty Pipe Detection: Flow defaults to zero
Flow Range: 0.2 - 20 ft/sec (.06 - 6.09 m/sec)
Maximum Pipe Pressure: 200 PSI (13.8 bar)
Temperature: Ambient 0° - 180° F (-17 - 82° C) • Fluid 32° - 212° F (0° - 100° C)
Minimum Conductivity: 20 microsiemens/cm
Power: 12 - 24 Vdc, 250 mA
Installation Fitting Size: 1-1/2" Male NPT
O-rings: EPDM
Materials:
     Mechanical: 316 SS/Brass
     Electrodes: Hastelloy
     Electrode plate: PVDF
     Housing Cast: powder-coated aluminum
Weight:
     EX101: 3 lbs (1.36 kg)
     EX201: 3.4 lbs (1.54 kg)
Dimensions:
     EX101: 4" square x 12" long (10cm square x 30.5cm long)
     EX201: 4" square x 17" long (10cm square x 43.2cm long)
File
EX100B.pdf (483 views)
File
EX100.pdf (556 views)
File
ao55.pdf (455 views)
File
ft420.pdf (471 views)
EX100/200 ELECTROMAGNETIC FLOW SENSORS
FEATURES:
  • Depth adjustable sensors
  • EX101 fits any 1-1/2" pipe fitting (standard saddle, for instance) and adjusts to pipe sizes 3-10"
  • EX201 adjusts to pipe sizes 10-48"
  • Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
  • Optional 4-20mA flow rate and totalizer display
  • Alternatively, signal can be sent directly to a PLC or other control
  • Available in brass or 316 stainless steel

Additional information