EX80 INSERTION MAGMETERS

37.jpg
FEATURES:
  • Low-flow performance and accuracy superior to any mechanical flow sensor
  • No moving parts to wear out
  • Dedicated fittings for simplicity
  • Retainer clip automatically sets correct depth
  • Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
  • Simple pulse train output can be used with most signal processing modules, or sent directly to a PLC
  • Available for pipe sizes 1 to 12 inch, in 316 stainless and PVC
Rating
0 vote
Favoured:
0

Listing Details

Product Description
The EX81 is an insertion electromagnetic flowmeter for use with conductive liquids in pipe sizes 1 to 3 inches.  The EX82, Insertion Magmeter, is for use with pipe sizes 4 to 10 inches.  The EX83, Insertion Magmeter, is a stainless steel electromagnetic flowmeter designed for use with pipes 12 inches in diameter.  With no moving parts, the insertion electromagnetic flowmeter is highly suitable for corrosive environments and for difficult applications such as those involving changing viscosities and pulsating flows.  The insertion electromagnetic flowmeter is particularly recommended for metering the output of air-driven diaphragm pumps. Designed for modularity and versatility, the EX80 series, insertion electromagnetic flowmeters, have a current-sinking pulse output, which can be combined with the appropriate transmitter or indicator depending on the application.  For 4-20mA analog output and display of rate and total, an FT420, pulse and 4-20mA output, can be used.  For a 4-20mA analog output only, the AO55, blind 4-20mA converter, can be mounted directly onto the meter.  If the EX80 series, Insertion Magmeter, is being used with a programmable controller, the output signal can be fed direct with no other conditioning required. The EX80 series, insertion electromagnetic flowmeters, requires a special fitting, since it is not depth-adjustable as are the EX100/200 series meters.  Installation in the fitting ensures correct depth placement in the pipe.  Fittings and sensors are available in PVC and stainless steel.
Specification
Accuracy: 1% of full scale
Output: Square wave pulse, opto isolated, 500 Hz @ 20 ft/sec
Bi-Directional: Direction output, opto isolated
Empty Pipe Detection: Flow defaults to zero
Flow Range: 0.2 - 20 ft/sec (.06 - 6.09 m/sec)
Maximum Pipe Pressure: 200 PSI (13.8 bar)
Maximum Temperature:
     PVC 130° F (55° C)
     Stainless Steel 200° F (93° C)
Minimum Conductivity: 20 microsiemens/cm
Power: 12 - 24 Vdc, 250 mA minimum
Materials:
     Mechanical: 316 SS/PVC
     Electrodes: Hastelloy
     Electrode plate: PVDF
     Housing Cast: powder-coated aluminum
O-rings: EPDM
Size: 4 inch square; 6-7 inches total length (10.2 cm square; 15.2 to 17.8 cm total length)
Weight: 2 lbs (907g)
File

EX80B.pdf (489 views)

File

EX80.pdf (400 views)

File

ao55.pdf (367 views)

File

ft420.pdf (389 views)

Additional information