TX80 TURBINE INSERTION FLOW METERS

39.jpg
FEATURES:
  • High-quality ruby bearings for excellent low-flow performance and long life
  • One easily-replaced moving part
  • Pickup exerts no magnetic drag on the rotor
  • Square-wave frequency output can connect directly to PLC's or counter controls
  • Indicator or transmitter can be mounted on the flowmeter or remote
  • Fittings are available in a wide variety of materials and sizes
Rating
0 vote
Favoured:
0

Listing Details

Product Description
The TX80 Series, Turbine Insertion Flow Meters, are turbine-type insertion flow meters designed for use in pipe sizes 1-1/2 to 8 inches.  High-quality jewel bearings and nickel-bound tungsten carbide shaft are used for maximum life and extreme low friction.  Turbine Insertion Flow Meter bodies are machined from solid rod for maximum precision.  Lowflow performance is superior for Insertion Turbine Flowmeters.  The rotation of the rotor is detected by a non-drag Hall-effect sensor.  The Insertion Turbine Flowmeter's output is a pulse-type square wave, which can be sent long distances (up to 2,000 feet) without a transmitter.  This signal can be connected directly to PLC's, counters, and computer cards. TX80 Turbine Insertion Flow Meters are ideal for chemical proportioning applications.  For rate and total display, as well as pump pacing, the FT415 or FT420 flow indicator can be mounted directly on the TX80 Series Insertion Turbine Flowmeter.  For a 4-20mA analog output only, the AO55, blind 4-20mA converter, can be mounted directly onto the meter. The TX80 Series Turbine Insertion Flow Meters require special fittings, since they are not depth-adjustable, installation in the fitting ensures correct depth placement in the pipe.  Fittings are available in PVC, brass, and stainless steel.  Insertion Turbine Flowmeters are available in brass, 316 stainless steel, and polypropylene.
Specification
Flow Range: 0.2 - 30 ft/sec (.06 - 9.14 m/sec)
Accuracy: +1% of full scale
Sensor/Output: Hall Effect Sensor - 12 VDC current sinking pulse
Maximum Pipe Pressure:
     PVC: 175 psi @ 75° F (12 bar)
     Brass: 200 psi (14 bar)
     316 SS: 250 psi (17 bar)
Maximum Temperature:
     PVC: 130° F (55° C) at 0 psi
     Brass, SS: 200° F (93° C) at 0 psi
Nominal K-factor: 11 Hz/F/s (3.6Hz/M/s)
Power: 6 - 24 Vdc, 8 mA minimum
Materials:
     Sensor Body: Polypro, Brass, 316 SS
     Rotor: Polypro
     Shaft: Nickel-bound tungsten carbide
     Bearings: Ruby
     Cable: #22 AWG 3-con 18 ft (6m)
Maximum Cable Run: 2,000 ft (650m)
Dimensions: 1-1/2 inch dia. x 4 inches long(3.8 cm dia. x 10 cm long) Weight: ~2lbs (907g)
File

tx80B.pdf (398 views)

File

tx80.pdf (387 views)

File

ao55.pdf (363 views)

File

ft415.pdf (344 views)

File

ft420.pdf (346 views)

Additional information