695pH INDUSTRIAL pH TRANSMITTER

96.jpg
FEATURES:
  • Isolated 4-20 ma output scalable to any 1 pH unit span
  • NEMA 4X Enclosure
  • Large LCD Screen
  • High Accuracy
  • Manual/Auto Temp. Compensation
  • Wide Power Supply Range
  • High Input Impedance
Rating
0 vote
Favoured:
0

Listing Details

Product Description
The industrial pH transmitter is a 2-wire 4-20 mA pH transmitter enclosed in a sealed NEMA-4 enclosure.  The industrial pH transmitter has an LCD screen powered by 11 to 80 VDC.  The pH transmitter's span has selectable pH values from 1 to 14 pH units via an internal dip switch.  The industrial pH transmitter uses BNC connections for the pH transmitter's pH probe and has tinned leads for a 3-K Balco ATC temperature probe or simulation resistor (3K resistor included).  NOTE: If you will be using the industrial pH transmitter to monitor liquid with a pH close to 7pH or if your water temperature is close to 77°F the 3-K Balco ATC temperature probe will not be needed. Recording
Global Water's GL500 pH Recorder adds recording capabilities to the industrial pH transmitters.  The GL500 pH Recorder connects to the pH transmitter's 4-20mA output to record data.  In addition, Global Water offers the PC320 pH Controller to use the industrial pH transmitter's output to control pumps or alarms.
Specification
Industrial pH Transmitter:
     Range: 0 to 14.00 pH
     Resolution: 0.01 pH
     Accuracy: 0.02pH + 1 digit
Span: Any 1 to 14 pH unit, selectable with internal DIP switch
Temp compensation: Auto 32 to 212 °F (0 to 100.0 °C) or manual using fixed resistor
Input impedance: >1012 ohms
Output: 4 to 20 mA
Operating temperature: -14 to 140 °F (-10 to 60 °C)
Connector: BNC
Power Source: 11 to 80 VDC
Dimensions: 4.92x2.95x3.94 inch (37.9x7.5x10.0 cm) (NEMA 4X case)
File

695pHB.pdf (504 views)

Additional information