EC400 CONDUCTIVITY TESTER

117.jpg
FEATURES:
  • Autoranging meter
  • High accuracy multi-range conductivity tester cell
  • Waterproof conductivity tester
  • Self calibration on power up
  • Saves up to 15 readings
  • Automatic Temperature Compensation
Rating
0 vote
Favoured:
0

Listing Details

Product Description
The EC400 Conductivity Testers offer three ranges of measurements from tap water to wastewater and any aqueous solution requiring a conductivity, TDS, or salinity measurement.  The conductivity testers can display several different units of measure including uS/cm, mS/cm, ppm, ppt, mg/L, and g/L.  The LCD for the conductivity testers is a large 3-1/2 digit display with an analog bar graph to indicate trends.  The conductivity testers also simultaneously displays conductivity, TDS, or Salinity plus temperature. The EC400 Conductivity Tester automatically compensates at 2% per °C.  The conductivity testers include an adjustable conductivity to TDS ratio factor that allows for convenient calculation of the TDS value.  The conductivity tester self calibrates on power up and has an easy to replace conductivity tester cell module.  The conductivity testers can save up to 15 readings for easy recall.  The conductivity tester was designed to the IP67 standard for wet environments.  The EC400 Conductivity Testers include a meter and conductivity cell, protective sensor cap, sample cup with cap, four SR44W button batteries, and 48 inch (1.2m) neckstrap.
Specification
Conductivity Range:
   0 to 199.9uS
   200 to 1999uS
   2.00 to 19.99mS
TDS/Salinity Range:
   0 to 99.9ppm (mg/L)
   100 to 999ppm (mg/L)
   1.00 to 9.99ppt (g/L)
Temperature Range: 32° to 149°F (0° to 65°C)
Max. Resolution:
   0.1uS/cm, 0.1ppm (mg/L), 0.1°F/ °C
   1uS/cm, 1ppm (mg/L), 0.1°F/ °C
   0.01mS/cm, 0.01ppt (g/L), 0.1°F/ °C
Accuracy: +2%FS, +2%FS, +1.8°F/1°C
Power: four 1.5V button batteries
Size: 1.4x6.8x1.6 inch (36x173x41mm)
Weight: 3.8oz (110g)
File

ec400B.pdf (445 views)

File

ec400.pdf (492 views)

Additional information