Print |  Close this window


Product Description
The quick release water sampler is ideal for sample removal from wastewater, shallow wells and surface water, including lakes, ponds, and holding pools.  The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance.  The peristaltic pump is designed to take a manual sample and has the ability to back flush the sample hose once you are finished taking the sample. Power
The water sampler operates using an external 12 volt DC power source that can supply at least 2 A continuous.  The variable speed motor is reversible and can draw water samples at a wide range of speed. A power cord, 10 ft (3.05 m) long, is included with each quick release water sampler.  The power cord is fitted with alligator clips for easy connection to most 12-volt DC batteries, including car batteries or small 12V, 5 AH gel cells. Sampling
To provide high sample integrity, the water sample only contacts the PharMed BPT and polyethylene tubing.  The tubing is easily cleaned or replaced.  The Masterflex easy load design and adjustable tubing retention system allow for multiple tubing sizes and for changing the tubing without removing the pump head from the drive.  To avoid cross contamination or lengthy decontamination procedures simply change the inexpensive tubing between samples.
Operating Temperature: 32° to +158°F (0° to +70°C)
Operating Voltage:  12V DC
Current Draw:  2A max Flow Rate:  Variable depending on tube size and head height.
Backflush Rate:  Same as Flow Rate
Pump Type:  Peristaltic, Masterflex easy-load
Maximum Lift:  22 ft(6.7 m)
Pump Tube:  L/S 17 PharMed BPT Peristaltic Pump Tubing, 1/4 inch ID
Sample Hose:  15 ft (4.6 m) nylon reinforced polyethylene tubing with intake strainer. Enclosure: Expanded UV protected PVC
Dimensions: 14x12x6 inch (36x30.5x15 cm)
Weight:  7.5 lb (3.5 kg) (Shipping Weight 9 lb (4.1 kg)) Pump Tube:
Tubing size L/S 13 L/S 14 L/S 16 L/S 25 L/S 17 L/S 18
Inside diameter* in. (mm) 0.03 (0.8) 0.06 (1.6) 0.12 (3.1) 0.19 (4.8) 0.25 (6.4) 0.31 (7.9)
Hose barb size* in. (mm) 1/16 (1.6) 1/16 (1.6) 1/8 (3.2) 3/16 (4.8) 1/4 (6.4) 3/8 (9.5)
SP250B.pdf (448 views)
SP200manual.pdf (369 views)
  • Easy interface with speed control for exact sample size with no spilling
  • Quick release Masterflex pump head for reduced maintenance
  • Reversible motor to backflush sampling hose
  • Weather resistant enclosure
  • Each pump head for precision pump tubing accepts tubing sizes L/S® 13, L/S® 14, L/S® 16, L/S® 25, L/S® 17, and L/S® 18
Print |  Close this window