
SIT65 SATELLITE INTERNET TELEMETRY

- Remote data and control anywhere -- guaranteed!
- Receive data by internet on your computer
- Near real time spreadsheet data and control
- Alarms by text to your cell phone or email
- Interface to almost any sensor
- Easy installation - just install antenna and turn it on
- Low cost/economical
- Solar, battery, or AC power
Listing Details
Global Water's SIT65 Satellite Internet Telemetry provides the easiest and most economical way to collect environmental data
remotely. The remote satellite telemetry system uses the latest satellite and Internet technologies to bring data to your
computer in near real time. The satellite internet telemetry system includes a data transmitter and a rechargeable battery
enclosed in a rugged, rain proof, and lockable enclosure; a ground-to-satellite antenna; and mounting hardware.
Flexible Inputs and Outputs The SIT65 Satellite Internet Telemetry system will interface with most sensors, including all of Global Water's rugged 4-20 mA sensors. The satellite internet telemetry system includes up to eight analog inputs, three factory programmable status/accumulator inputs, and up to two open collector outputs. Simple Installation and Operation The SIT65 Satellite Internet Telemetry system is simple to set up and operate: just hook up your sensors, point the antenna to the sky, and turn on your telemetry equipment. Satellite service is available anywhere in the world for the satellite telemetry system. Data is transmitted from the satellite telemetry system based on programmed time intervals and/or alarms and is transferred via satellite and Internet to a dedicated web page. You can monitor and collect data anywhere you have web access. Power Options The SIT65 Satellite Internet Telemetry system includes a 5 AH gel cell battery and a NEMA 4 enclosure. For long term AC power, we recommend the AC Charger. We also offer solar panels to support your remote satellite telemetry installation. A Smart Charger is recommended for all solar powered satellite internet telemetry system installations.
|
Inputs: Up to 8 analog 4-20mA, 0-1mA, 0-500uA, 0-5VDC, or 0-10VDC Up to 3 digital status or accumulator inputs Dedicated battery voltage monitor Outputs: Up to 2 open collector control outputs Power Requirements: 12V DC Battery: Rechargeable 12V 5AH Gel Cell Current Draw: 5mA minimum standby; 80mA receiving; 2A transmitting Operating Temperature: -40° to +140°F (-40° to +60°C) Battery may not apply Humidity: 0-100% non-condensing Antenna Cable: 16 ft standard Dimensions: Inner 10x12x6 in (25.4x30.5x15.2cm), Outer Lid 12x14 in (30.5x35.5 cm) Weight: 21 lbs (9.5 kg) shipping weight |