
SP200 PERISTALTIC SAMPLING PUMP

- Easy interface with speed control for exact sample size with no spilling
- Reversible motor to backflush sampling hose
- Sample at any speed up to 500 mL per minute rate at 4 foot head
- Weather resistant enclosure
- 15 ft pickup hose with strainer provided
Listing Details
Global Water's SP200 variable speed portable peristaltic pump sampler is ideal for removing samples from shallow wells and surface
water, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and
requires minimal maintenance. The manually-operated peristaltic pump can backflush the sample hose after a sample has been
taken.
Power The SP200 Peristaltic Sampling Pump requires an external 12 volt DC power source that can supply at least 2 A continuous. The variable speed motor is reversible and can sample at any speed up to 500 mL per minute. A power cord (10 ft/3.05 m) is included with the unit. The power cord is fitted with alligator clips for easy connection to almost any 12 volt DC battery, such as a car battery or a small 12V, 5 AH gel cell battery. Sampling To provide high sample integrity, the SP200 does not allow water samples to contact any peristaltic pump components other than the norprene and polyethylene tubing. This tubing is easily cleaned or replaced. To avoid cross contamination or lengthy decontamination procedures, simply change the inexpensive tubing between samples. |
Operating Temperature: 32° to +158°F (0° to +70°C) Operating Voltage: 12V DC Current Draw: 2A max Variable Speed Portable Sample Pump Flow Rate: Variable Analog, up to 500 ml per minute at 4 ft. head Backflush Rate: Same as Flow Rate Type: Peristaltic Maximum Lift: 22 ft (6.7 m) Pump Tube: Norprene 1/4 inch ID Sample Hose: 15 ft (4.6 m) nylon reinforced polyethylene tubing with intake strainer. Enclosure: Expanded UV protected PVC Dimensions: 9x7.5x4.5 inch (23x19x11 cm) Weight: 4.5 lb (2 kg) (Shipping Weight 6 lb (2.7 kg)) |